GREEN BIM

Understanding Virtual Enviornment

2008-11-24T02:52:00.033Z

IES Virtual Environment is a comprehensive energy modelling and environmental analysis tool which can simulate just about everything happening to your building. Past use of Virtual Environment existed mostly outside of the architects' realm, however IES has done much recently to integrate their tools into the architectural process with push-button toolkits.

The strength of the toolkit is that it can be embedded into architectural design programs (Revit & Sketchup so far) and with a modified workflow one is capable of achieving truly integrated and iterative analysis.

The toolkit performs a series of independent analysis which makes it less comprehensive than the full Virtual Environment. The full suite contains an array of modules, each performing different tasks that are capable of feeding back into the main energy model. For example, if your project will utilize daylight harvesting you would first run daylight simulations and then link these results back into the thermal simulation module where you can see the energy impact from reduced cooling loads and electricity use. The process is similar for natural ventilation and solar shading analysis where separate modules link their results to the main thermal simulation engine. Even HVAC systems design can feed into the central energy model for collaborative A/E BIM analysis in a central model.

It is not immediately apparent where Virtual Environment falls in the traditional A/E firm structure and project workflow. What is apparent is that the ultimate success of its use requires a process shift in either the way the architect designs and delivers, or in the roles assigned to the mechanical and energy engineers (US in particular). Either way there must be time, budget, and client expectations to ensure that this level of collaboration succeeds.

Understanding Ecotect

2008-11-24T00:01:00.023Z

Ecotect is a studio companion that enables designers to better understand the relationship between buildings and their environment. As a visualization tool Ecotect interactively displays sun and shadows, solar rays, sun path diagrams and much more.

As an analysis program there are 3 common methods for calculating and visualizing data:

Analysis Grid (of points)

Analysis Surfaces

Thermal Analysis of Zones

Analysis Grid

The Analysis Grid is a single 3-Dimensional grid able to collect data over points in space. The analysis grid is used for analysis where the collected values are not interested in surface area or the sun angle. Common analysis here includes internal daylight levels, external sunlight hours, airflow and others. All of the solar related functions can be done within the program itself but for advanced daylighting and CFD airflow Ecotect links up to other programs, many of which are free to use.

Analysis Surfaces

Analysis surfaces are used to calculate and visualize solar issues that are relative to the sun angle. To understand the difference between this and the analysis grid just think that when a surface closer to being perpendicular to the sun it will read higher solar gain values, by contrast points have no area and will all show the same readings for any period of time exposed. Surface solar analysis is very helpful for early massing and orientation studies, as well as facade design.

Thermal Analysis

Ecotect is one of many energy modeling programs, most of which have different calculation methods and intended uses. The strength of Ecotect is with comparative design analysis where you can modify building geometry or attributes and see the relative impact on performance. For more advanced simulations Ecotect can export to other energy modeling programs with varying degrees of successful interoperability.

There are of course more analysis options in Ecotect than those briefly mentioned here, and if you wish to learn more head over to the Ecotect wiki: http://www.squ1.org/

BIM Use:

Ecotect very easily re-uses data from other programs as long as the models are either very simple or easily able to be reduced to the basic elements needed for analysis (see previous blog on this subject). Ecotect is able to import BIM room objects which are converted into zones for thermal and daylighting analysis. A small to moderate amount of manual cleanup is needed at this point in time depending on the BIM authoring tool used to produce the model (Revit, Archicad, etc).

SketchUp Virtual Environment

2008-09-02T22:54:00.005+01:00

The green software industry moves forward yet again with the recent announcement of an IES plug-in for Google SketchUp. Similar to the Revit Architecture plug-in IES now offers their VE-Ware, their sustainability toolkit and a direct link into Virtual Environment.

At the basic level this means that with a free version of SketchUp and a free VE-Ware plug-in, anyone across the globe can design a building or a home and evaluate the energy performance while tracking carbon emissions against the 2030 challenge. For those like myself who are passionate about change, we warmly welcome the opening up of the competition to any clever person owning a computer.

At the professional level this opens up these free tools to those modeling accurately in any non-BIM tools which can be exported into SketchUp (Rhino, 3DS Max, etc.). In essence, any firm using Revit in conjunction with other design tools now has the ability to track carbon at every stage of every project…with a free plug-in.

Design Analysis Workflow

2008-07-05T21:18:00.031+01:00

This post has moved to the following blog:

http://greenbimnetwork.blogspot.com/

Autodesk Ecotect

2008-06-28T23:52:00.010+01:00

Autodesk takes a giant leap forward in the green software industry with the aquisition of Square One Research LTD including substantially all of the assets related to of the Ecotect software tools for conceptual building performance analysis.

Available for Free Now!

"Square One Research and Autodesk share a commitment to using technology to make the design and construction of sustainable, high-performance buildings easier and more efficient," said Dr. Andrew J. Marsh, Co-Founder and Head of Research & Development, Square One Research. "We are pleased to join Autodesk and look forward to helping develop and deliver simple and effective building performance analysis to architects and engineers around the world."

Autodesk anounced simultaneously that it had acquired substantially all assets related to Green Building Studio, Inc.

See related story...

IES announces new Technical Director for Sustainably Initiatives

2008-03-18T01:38:00.003Z

Integrated Environmental Solutions (IES) has welcomed Richard Quincey (MEng, MCIBSE) as Technical Director: Sustainability Initiatives. Richard brings to IES extensive knowledge and experience in leading edge holistic and sustainable building design.

Richard was formerly Director: Building Sciences at Gifford and a Partner at Max Fordham Associates. He has diverse and extensive experience in innovative low-energy design, having worked on many award winning projects and is a UK accredited Low Carbon Consultant. His understanding of sustainable design and unique approach to the design process make him an ideal member of the IES team. Full Story...

Ecotect website now live!

2008-02-15T20:12:00.004Z

Great to see the Ecotect website live again....with new look!
http://www.squ1.com/ "Our customer support services have been an issue for some time. Turning this around is our primary focus for 2008 and beyond. It will take us a bit of time to get up to speed, but we are committed and determined to making the investments and improvements required." Ecotect

Autodesk Expands Sustainable Design Product Portfolio

2008-02-15T12:33:00.002Z

"Acquisitions of Analysis Technologies from Green Building Studio and Carmel Software Will Help Architects and Engineers Leverage Power of Building Information Modeling to Design More Efficient Buildings".

Autodesk announced on Feb 12 2008 that it has signed an agreement to acquire substantially all the assets of Green Building Studio, an innovative provider of web-based building energy analysis that enables architects and engineers to easily perform whole building energy analysis early in the design process.

Green Building Studio provides the ability to quickly and efficiently analyze building design proposals, providing building performance information to support sustainable design. Autodesk currently plans to continue support for the Green Building Studio web service and gbXML as an open standard, and to strengthen the web service's integration with its BIM software.

"We have partnered with Autodesk for many years, and commend their ongoing support for sustainability," said John Kennedy, CEO, Green Building Studio.

http://www.autodesk.com/green

Druk White Lotus School - "perhaps the greenest building ever"

2008-02-15T11:48:00.012Z

Inspired by the vision of His Holiness the 12th Gyalwang Drukpa, the spiritual leader of Ladakh and designed by international architects Arup Associates the buildings combine the best of traditional Ladakhi architecture with 21st century engineering excellence and so act as a model for appropriate, cost effective and sustainable development. http://www.dwls.org/

"The whole project is conceived as a model of appropriate and sustainable design. Building materials are mostly indigenous to Ladakh, with careful auditing of sustainable resource supplies. There is also no imported energy. None of this is achieved by compromising the quality of the architecture or of the interior spaces, which are spacious and light filled." Read more...

Autodesk has sponsored a film of this project which was shown last month at RCA, London with attendance from His Holiness the 12th Gyalwang Drukpa. The project is I think inspiring for us all, and should be used as a references of how far we can go to green our buildings - this includes Himalayan cultural integration focusing on the needs of young Ladakhis.

Revit Architecture to IES Workflow

2008-01-25T16:32:00.000Z

The IES Revit VE (Virtual Environment) Toolkits are ideal for use at the very early stages of the design process to provide quick assessment options for architects and engineers alike.

At early stages in projects up to 70% of the design decisions which affect performance have been made. The Sustainability Toolkit, performs the sustainable design analysis that is so important at these early concept stages – energy use, carbon use, daylighting and solar performance. Helping the design team establish the most appropriate sustainable and energy efficient approach. The following steps provide a quick guide to installing, setting up your Revit model and utilising the IES VE Toolkits.

Installation:

1. Download the plug-in from IES, currently in Beta

2. Ensure applications are closed

3. Remove via Control Panel IES if it exists.

4. Install V:\Other\IES\2007-12-12 IES Toolkit for Revit\ve5850.exe

5. The following tool bar appears in Revit

Preparing Revit model:

1. Add Room objects to your project.
2. It is important that the Rooms in Revit are built correctly and bounding on all sides, otherwise the results will not be accurate. For full details see this IES guide.
3. In Revit select Settings > Room and Areas Settings > and turn on “Compute Room Volumes”
4. Save project

Using the plug-in

1. Select > Set Model Properties, this may take a few seconds to load
2. Switch to Building Type tab
3. Select default room construction
4. Select building services system
5. Select place and location
6. Switch to Rooms tab
7. You are then able to override the room construction and room services system (this can be left as default for initial run)
8. Use left mouse button to orbit model (unlike shift and mouse wheel in Revit!)
9. Select > Check Model…and Review the IES Report (if issues exist return to Revit to fix)
10. After Check of Model is OK, check “I have checked the model is suitable for analysis”
11. Select OK, this returns to Revit
12. Select Toolkit
13. Run the LEED Toolkit to get results. IES LEED Toolkit features (Other Toolkits can be run too)

Suggestions:

Start of with a really small project, maybe only a couple of rooms and really understand what is being analysed and how changes in your model are being reported by the IES analysis tools.

Try File >Export > gbXML first to check your rooms are complete. (IES uses gbXML from Revit Architecture)

Questions:

How does IES know the north rotation - as at no time did I specify this, I assume it uses project north and ignores Revit true north if set in the project?

AutoCAD MEP Blog

2008-01-23T23:55:00.000Z

Here is a good blog by Scott Brisk entry about gbXML and what applications are using it. http://autocadmep.blogspot.com/2008/01/what-is-gbxml.html

Green Build 2008 - Boston

2008-01-23T10:00:00.000Z

This years Green Build 2008 international conference and expo event is in Boston, US - Nov 19-21.

"Buildings play a critical role in protecting and improving our environment and the health of the people who occupy them. USGBC’s Greenbuild conference and expo is an unparalleled opportunity to connect with other green building peers, industry experts, and influential leaders as they share insights on the green building movement and its diverse specialties."

USGBC UKGBC

Economist: Heat From The Street!

2008-01-10T10:42:00.000Z

Rona from our NY office has found this great new idea of capturing solar energy from the surfaces we walk and drive on in the Heat From The Street article!

Our Director of Sustainable Design in NY says: "This article illustrates the sort of simple and great “out of the box” ideas that have enormous potential in our work to design a more sustainable world. This is also the type of idea that exemplifies the integrated design approach and the power of early “visioning” that returns us to simple ideas unconstrained by “design as usual”.

More Economist alternative energy articles

Here is one example: IHS have installed a unique system in the car park of their new offices in the Scottish Highlands. The Road Energy system is hugely exciting. Capable of heating and cooling buildings, roads and airport runways it takes advantage of the superior absorption capacity of asphalt. See details....

New IES Boston Leader

2008-01-08T22:35:00.000Z

Kevin Settlemyre, a leader in the sustainable movement in the US's Northeast, has been appointed by Integrated Environmental Solutions (IES) Limited to head up its North American operations, which are headquartered in Boston. More on TenLinks Daily.

BIM/Sustainable webinars (HOK resource)

2008-01-03T10:48:00.000Z

Thanks again for attending all or some of the BIM/Sustainable webinars in December. All of the Presentations including audio are now on KNet. Great lunchtime listening/viewing!

HOK Green BIM Tools – Ecotect (HOK link)

HOK Green BIM Tools – Green Building Studio (HOK link)

HOK Green BIM Tools - IES (HOK link)

Happy holidays!

2007-12-20T20:18:00.000Z

"This past fall, HOK leaders gathered in Puerto Vallarta to plan our future. Our first day there was devoted to helping a local community improve its kindergarten, an activity that touched us all deeply. We believe that special day exemplifies HOK – who we are and how we can help others." More with HOK's Happy Holidays" web card....

Merry Christmas, Happy Chanukah, and Happy Holidays!

IES for Revit Architecture utilising gbXML

2007-12-13T22:08:00.000Z

Yesterday (12 Dec 2007) IES announces a new plugin within Revit Architecture links to IES software and enables easy top-level analysis of energy efficiency and building performance at early stages of the design process.

This new development enables architects to investigate the building's performance at early stages in the design process without any specialist simulation knowledge or the need to re-input geometry data, and without leaving the Revit environment. It allows the Revit Architecture BIM model to be easily and quickly imported into IES' unique system of integrated building performance analysis tools. More details...

Think 2008 - May 7-8 London!

2007-12-13T18:20:00.001Z

Registration for Think, the leading UK exhibition and conference on sustainability in the built environment is now live. Entrance to the exhibition is free if you pre-register here. The show floor is zoned, taking visitors on a journey through sustainable delivery in the built environment. Visitors will see leading companies in every sector of the market.

Think website...

Is politics getting way of climate change?

2007-12-11T23:16:00.000Z

In an excellent Newsnight report tonight, the BBC report focuses on the Bali summit and looks at. “How much of a country's emissions are down to the way its people live? Countries like China and India may be among the world's worst CO2 emitters - but a great many of their citizens' carbon footprints are very small.” More..

Associated Press reports "Delegates at the U.N. climate conference struggled to agree Tuesday on whether they will call on rich nations to cut greenhouse gas emissions"...on the 10th anniversey of the birth Kyoto Protocol today.

More Newsnight - Climate Maps - Fair Solution?

Autodesk e2 energy podcasts

2007-11-29T23:05:00.000Z

Here are 6 thought provoking Autodesk sustainable design e2 podcasts:

Chapter 1: Paving the Way (Transportation)
Chapter 2: Energy for a Developing World (Bangladesh)
Chapter 3: Harvesting the Wind (Minnesota Wind)
Chapter 4: Growing Energy (Brazil)
Chapter 5: State of Resolve (California)
Chapter 6: Coal /Nuclear: Problem or Solution? (energy Future)

www.autodesk.com/green

Aecbytes Ecotect Article

2007-11-29T22:57:00.000Z

Ecotect is a 3D building analysis program that assists architects in analyzing many aspects of a building’s performance, with a particular emphasis on creating energy efficient, sustainable designs. http://www.aecbytes.com/feature/2007/Ecotect.html

Green Build (365)

2007-11-01T17:59:00.000Z

Greenbuild365 website this year that will broadcast live the plenaries and masterspeaker sessions at Greenbuild in Chicago. They will also include a blog, interactive polling and other features during the week. This includes opening plenary by Bill Clinton - watch it live Nov 7.

RIBA and 'Combating Climate Change'

2007-11-01T17:52:00.000Z

The RIBA's 'Combating Climate Change' programme will help RIBA members, the institute and its staff to contribute towards addressing the challenge of climate change. There are four strands that make up the Combating Climate Change programme. Visit the RIBA site...

Green Power Partnership

2007-10-02T09:41:00.001+01:00

The Green Power Partnership encourages organizations to buy green power as a way to lessen the environmental impacts associated with conventional electricity use. Using conventional fossil fuel based electricity can be one of the greatest environmental impacts associated with your organization. US Green Power Locator

BRE UK ClimateLite solutions

2007-10-01T11:20:00.000+01:00

"Be at the forefront of low carbon building design"

The BRE are developing their ClimateLite tool for sustainable design. ClimateLite will help building designers to apply from a very early stage - a systematic approach that quickly and cost effectively addresses challenging current and future carbon emission targets and the use of renewable energy technologies. This three-year, DTI funded project aims to have a prototype tool ready by October 2008. Read more...

Also look at SBEM (Simplified Building Energy Model). SBEM is a computer program that provides an analysis of a building's energy consumption. SBEM calculates monthly energy use and carbon dioxide emissions of a building given a description of the building geometry, construction, use and HVAC and lighting equipment. http://www.bre.co.uk/energyrating/page.jsp?id=694

Tools to help Carbon Neutrality

2007-09-27T12:07:00.000+01:00

Here is a nice video 5 min from Green Building Studio for Designing a building to be carbon neutral in Five minutes using their online web service.
http://www.greenbuildingstudio.com/video/carbonneutraldesign.html

Steps to zero carbon emissions!

2007-09-24T11:23:00.000+01:00

To coincide with HOK’s Emissions:2010 campaign, here is some exciting news about upcoming webinars being offered by the USGBC on Carbon Emissions Reduction strategies.

Register today for the U.S. Green Building Council's new Carbon Reduction Webinar Series and take the first step toward achieving "zero emissions" for your company or your building projects. In partnership with climate change experts from Pew Center on Global Climate Change, World Resources Institute, and CTG Energetics, Inc., and media partner Stamats Commercial Buildings Group, USGBC brings you its newest webinar series.

Green Roofs

2007-09-10T14:20:00.000+01:00

Links provided by Foard Meriwether:

- American Hydrotech
- Carlisle Roofing
- Green Roof Blocks
- Hickman Eco Roof System
- Green Roof Directory

HOK IN THE NEWS

2007-09-10T13:53:00.000+01:00

Straw Bales Now Being Used in Large-Scale Projects The AIA's Soloso publication profiles HOK's design of the 56,000-sq.-ft. Santa Clarita Transit Maintenance Facility. More...

"Sustainable Design Integration for Structural Engineers," Structural Engineer, August 29, 2007, by HOK's Ruben Aya-Welland. Read the story.

Think!

2007-08-21T21:47:00.000+01:00

The official Think 2007 video is now live on http://www.think08.co.uk/ As well as revisiting the event and giving an overview of participants' feedback, it also highlights the role Think plays in helping the built environment meet the challenges of the government's action plan for 2016 and beyond. Think was a good event this year, make sure you put it in your diaries for 2008! Think Keynotes

Autodesk was highly commended for its “sustainable participation” in Think 07 where their centrepiece was a huge ice sculpture of a polar bear, reminding us of the urgent need to act on global warming and to protect natural resources.

USGBC Honors Green Building Leaders

2007-08-17T22:48:00.000+01:00

The Organizational Excellence Award was presented this year to HOK and was accepted by Mary Ann Lazarus, Senior Vice President. Sustainable design is a core value for HOK, and is integral to every aspect of the firm's work and operations. HOK was the first large design firm to join USGBC, and HOK's sustainable leaders helped USGBC develop the first LEED rating system. The firm has continued to be an active partner in USGBC, providing leadership in the LEED program and sponsoring and participating in Greenbuild and other USGBC activities.

The partnership reached a new level this past year when HOK sustainable design principals assumed leadership roles in the Gulf Coast Reconstruction charrettes at Greenbuild 2005 and the production of the resulting New Orleans Principles and other reports. HOK was also the first firm to reach 100 LEED Accredited Professionals and today boasts more than 430 on staff, including much of the firm's leadership. All new salaried hires are now expected to become accredited within six months, with the long-term goal to have 100% of design professionals accredited. HOK has adopted a policy to apply LEED to every project and has fully integrated LEED into "The HOK Guidebook to Sustainable Design." More...

HOK Sustainable Design Website

2007-08-16T23:09:00.000+01:00

Building on two decades of experience in sustainability, HOK creates value for our clients through innovative, environmentally responsible design.

We embrace our responsibility as one of the world's most influential design firms to advance sustainable design for every building type, geographic region and budget level. Our people are impassioned by the opportunity to design healthy, environmentally friendly buildings that improve our planet's overall environmental condition. By designing solutions that enhance aesthetic goals, limit resource consumption, improve building performance, and promote health and productivity, HOK is leading the way toward an increasingly sustainable future. http://www.hoksustainabledesign.com/

The Building Sector: Kyoto Is Easy!!

2007-07-26T23:12:00.000+01:00

Here is a powerpoint from Busby and Asccociates Architects describing some solutions needed to be able to meet the C02 emmisions targets of Kyoto Protocol. "8% of the worlds C02 emmissions come from the production of cement!" Producing one tonne of cement emits approximately one tonne of CO2.

The Kyoto Protocol is an agreement made under the United Nations Framework Convention on Climate Change (UNFCCC). Countries that ratify this protocol commit to reduce their emissions of carbon dioxide and five other greenhouse gases, or engage in emissions trading if they maintain or increase emissions of these gases. Kyoto Protocol - Energy policy of the United Kingdom - United Kingdom Climate Change Bill

IES Support for Revit Architecture 2008

2007-07-20T15:09:00.001+01:00

IES have recently announced the latest version of the Virtual Environment software, version 5.8 has just been released, one highlight of the new release includes the ability to Import gbXML files from Revit Architecture 2008 June build. Read news...

Ecotect: Natural Frequency Journal

2007-07-20T14:17:00.000+01:00

I have just stumbled across these articles which are worth recording on my blog....Natural Frequency is an electronic journal for articles on the environmental design of buildings and the application of analysis and simulation in architecture by Dr Andrew Marsh MD of Ecotect.

ECOTECT as a Teaching Tool With its highly visual approach to building analysis and simulation, ECOTECT has enormous scope to be used as a teaching resource at any level in both architecture and engineering courses. Read...

Building Analysis: Work Smart, Not Hard The most efficient approach when undertaking any form of work is to minimise your own effort whilst maximising the potential benefits and/or impacts that may flow from it. Read...

Thermal Modelling: The ECOTECT Way For ECOTECT to properly understand a thermal analysis model, it requires that you adhere to some specific conventions when constructing it. Read...

Making a Thermal Comparison One of the first things many people say when introduced to analytical software is -- "OK, but just how accurate is it?". Read...

CAD Geometry vs Performance Analysis
With an increasing regulatory emphasis on energy efficiency and building performance analysis within the design process. Read...

The Thermal Effects of Solar Gain
The true impact of solar radiation on the internal conditions within a space are often much more complex than this simple relationship would suggest. Read...

Other Ecotect sites to visit: Square One Wiki (includes analysis concepts)- Square One Website

Do's and Don'ts for Sustainable Architects

2007-07-17T22:39:00.000+01:00

Here are some great do's and don'ts from an AECbytes article from 2005 and still very applicable today:

"Don't — feel like you have to immediately master the new simulation programs that perform the analysis. Grow into these programs over time. Look for young architects coming out of school that have the aptitude and interest in using these programs. For those who will never grow to use them, it is absolutely fine. Again, just be the best in the world at providing the data necessary to run the simulations and interpret the results.

Don't — wait until the design is done to have a simulation performed. It is best to do these kinds of studies at the conceptual design stage so that you still have time to make modifications to the design for optimizing the energy efficiency of the building.

Do — begin to read about sustainable design and which tips and tricks you can employ to keep buildings warmer in the winter and cooler in the summer without additional energy consumption. A good place to start learning is the World Green Building Council website.

Do — develop an understanding for energy-efficient building components and attempt to specify them as much as possible in your designs.

Do — develop a relationship with an engineer that employs advanced energy simulation software. Be very good at generating the necessary inputs so that it is easy to run analysis against your designs.

Do — market your newly found skills. Architects don't normally appeal to clients with an energy competence message. It's time!

Do — consider starting your projects in 3D from the outset. The virtual model linked to software assessing building energy efficiency can lead to improvement in the overall design. "

Read full AeCBytes article....

eQUEST Building Energy Use Analysis Tool

2007-07-17T19:48:00.000+01:00

About Download Tutorial - Features -
"eQUEST is a sophisticated, yet easy to use, freeware building energy use analysis tool that provides professional-level results with an affordable level of effort. eQUEST was designed to allow you to perform detailed comparative analysis of building designs and technologies by applying sophisticated building energy use simulation techniques but without requiring extensive experience in the "art" of building performance modeling.

The DOE-2 software was developed by James J. Hirsch & Associates (JJH) in collaboration with Lawrence Berkeley National Laboratory (LBNL), with LBNL DOE-2 work performed mostly under funding from the United States Department of Energy (USDOE)"
More...

TAS Building Simulation Software

2007-07-16T16:55:00.001+01:00

About - Features - Bldg Regulations - Download

TAS is a suite of software products, which simulate the dynamic thermal performance of buildings and their systems. The main module is Tas Building Designer, which performs dynamic building simulation with integrated natural and forced airflow. It has 3D graphics based geometry input that includes a CAD link. Tas Ambiens, is a robust and simple to use 2D CFD package which produces a cross section of micro climate variation in a space.

Tas is a complete solution for the thermal simulation of new or existing buildings, allowing design professionals to compare alternative heating/cooling strategies and façade design for comfort, equipment sizing, energy demand and Part L2.

Rating Systems from around the World

2007-07-15T23:00:00.000+01:00

I have just posted details of four rating systems around the world. I have taken a quick look at the LEED, BREEAM, CASBEE, GREEN STAR websites here I have posted a summary of them and what they offer. India is currently looking to implement LEED, Canada has adopted LEED with amendment, UK has used their own long established system of BREEAM.

If you are using these systems I would be interested to know how helpful the tools you used where for early design analysis and if you have any lessons learned.

CASBEE Rating System (Japan)

2007-07-15T22:47:00.001+01:00

Overview - Assessment Method - Tools - Download CASBEE
Promoting sustainability is a major social challenge.As the building industry consumes large amounts of material resources and energy, specific technological and political means should be developed in order to promote sustainable buildings.To be nationally authorized in Japan, a cooperative academic, industrial and governmental project has been to establish a new system called the Comprehensive Assessment System for Building Environmental Efficiency (CASBEE).

Construction consumes and discards resources and energy in enormous quantities, is one field where we must act urgently to develop and promote techniques and policies able to assist the drive towards sustainability.

CASBEE was developed according to the following policies:
· be structured to award high assessments to superior buildings, thereby enhancing incentives to designers and others.
· be as simple as possible.
· be applicable to buildings in a wide range of applications.
· take into consideration issues and problems peculiar to Japan and Asia.
More...

GREEN STAR Rating System (Australia)

2007-07-15T22:43:00.000+01:00

About - Tools - Categories - C alculation GREEN STAR
The Green Building Council of Australia (GBCA) has developed a national environmental rating tool for buildings called the ‘Green Star’ rating system. The tool rates a building in relation to its management, the health and wellbeing of its occupants, accessibility to public transport, water use, energy consumption, the embodied energy of its materials, land use and pollution.
Green Star aims to assist the building industry in its transition to sustainable development.

The Green Star environmental rating system for buildings was created for the property industry in order to:
· establish a common language
· set a standard of measurement for green buildings
· promote integrated, whole-building design
· recognise environmental leadership
· identify building life-cycle impacts
· raise awareness of green building benefits.

There is a suite of Green Star rating tools for commercial offices at all phases of development - design, construction, and operations. Projects are evaluated against eight environmental impact categories, plus innovation. Within each category, points are awarded for initiatives that demonstrate that a project has met the overall objectives of Green Star and the specific criteria of the relevant rating tool credits. Points are then weighted and an overall score is calculated, determining the project's Green Star rating. Green Star rating tools use Stars to rate performance:

· 4 Star Green Star Certified Rating signifies 'Best Practice'
· 5 Star Green Star Certified Rating signifies 'Australian Excellence'
· 6 Star Green Star Certified Rating signifies 'World Leadership'
More...

BREEAM Rating System (UK)

2007-07-15T22:40:00.000+01:00

About - Features - Tools - Certification - How does it work BREEAM
The BRE assessment methods and tools are all designed to help construction professionals understand and mitigate the environmental impacts of the developments they design and build.

The BREEAM assessment versions look at the same broad range of environmental impacts:
· management
· health and wellbeing
· energy
· transport
· water
· material and waste
· landuse and ecology
· pollution

Credits are awarded in each of the above areas according to performance. A set of environmental weightings then enables the credits to be added together to produce a single overall score. BREEAM assesses buildings against a set criteria and provides an overall score which will fall within a band providing either a Pass, Good, Very Good or Excellent rating.
More...

LEED Rating System (US)

2007-07-15T22:33:00.000+01:00

About - Features- Accreditation - Resources - Join U.S. Green Building Council
Non-profit organization dedicated to sustainable building design and construction. Developers of the LEED building rating system. The council is a community of more than 10,000 organizations from every sector of the building industry united by a common purpose: to transform the building marketplace to sustainability.

LEED-certified buildings:
· are leading the transformation of the built environment
· are built as designed and perform as expected.
· have lower operating costs and increased asset value
· are healthy and comfortable for their occupants
· reduce waste sent to landfills· conserve energy and water
· reduce harmful greenhouse gas emissions
· qualify for tax rebates, zoning allowances, and other incentives in hundreds of cities
· demonstrate an owner's commitment to environmental stewardship and social responsibility

To earn certification, a building project must meet certain prerequisites and performance benchmarks ("credits") within each category. Projects are awarded Certified, Silver, Gold, or platinum certification depending on the number of credits they achieve. USGBC will fully rebate certification fees for any project awarded LEED platinum certification.

Tools for early Building Simulation

2007-07-15T07:59:00.000+01:00

To understand some of the building simulation programmes available, I am going to list of few of them here and start to figure out which ones can be useful for architects early in design during feasibility and concept stages and there connectivity with Revit:

ECOTECT
Features - 3D Interface - Free Download - Building Regs
"ECOTECT Is an industry leading building analysis program that finally allows designers to work easily in 3D and apply all the tools neccesary for an energy efficient and sustainable future...ECOTECT is a complete building design and environmental analysis tool that covers the broad range of simulation and analysis functions required to truly understand how a building design will operate and perform."

Shadows & Reflections - Shading Design - Solar Analysis - Lighting Design -Right-to-Light -
Acoustic Analysis - Thermal Analysis - Ventilation & Air Flow

I like the 3D interface with this software, Architects like this as the results are very visual with dynamic 3D views and false colour diagrams - in early design these tools stimulate a healthy conversation and design debate….may need supporting with engineering consultancy at later stages of project.

IES
Features - Revit MEP - Building Regs
"IES There is now a direct link between the 3D modelling platform Revit and the IES . Jointly developed between IES and Autodesk, it represents a revolutionary change for design teams working from a common model. Not only does IES software calculate heating & cooling loads within Revit MEP, but the suite can be launched in order to carry out the full range of sustainable design analyses. Dedicated toolkits have been developed to make these analyses more accessible to users who are new to the field. The now allows for the import of gbXML files. New interface for gbXML files sourced from Revit Architecture’s June 2007 update."

IES tools have now a connection with Revit MEP since early 2007, this is a great step forward for the industry and has generated much discussions as to the fit of IES in the Architectural workflow. The IES tools are very sophisticated and relied on by many engineers. It is questionable about how useful IES will be for Architects early in design…happy to see examples of how this could work.

Green Building Studio
Features - Tutorial - Downloads - Login
"Green Building Studio If you are involved in the building design and construction industry and are concerned about meeting today’s significant energy and resource reduction goals, you know how difficult it is to determine which actions to take to meet these goals. Green Building Studio, Inc. provides the only web-based energy engineering analysis solution that integrates with today’s 3D-CAD/BIM applications. Green Building Studio enables your design team to have immediate whole building energy analysis results on all building schemes while sharing files with today’s engineering tools. This solution reduces two weeks of work to a day."

This is a web-based solution where you upload your GBxml file for testing...I'm not too sure how this solution is favored by Architects but worthy of trying out. GBxml can be output from Revit files.

EnergyPlus
Features - Free Download
"EnergyPlus is a building energy simulation program for modeling building heating, cooling, lighting, ventilating, and other energy flows. While it is based on the most popular features and capabilities of BLAST and DOE-2, it includes many innovative simulation capabilities such as time steps of less than an hour, modular systems and plant integrated with heat balance-based zone simulation, multizone air flow, thermal comfort, and photovoltaic systems. EnergyPlus is a stand-alone simulation program without a 'user friendly' graphical interface. EnergyPlus reads input and writes output as text files."

No graphics, this is all text based. Useful for early design, not sure how it will be taken up by Architects who love to visualize.

I would welcome your comments on how you are using building simulation tools in your process and to the usefulness that they bring. Please let me know if you prefer other solutions.

Green Autodesk

2007-07-14T20:42:00.001+01:00

The sustainable design movement is being led by you and we encourage you to visit their www.autodesk.com/green to find stories, profiles and information to assist in your continued sustainable design learning. Autodesk have recently sponsored the "Envisioning Change" art exhibit to increase awareness of the effects of climate change on the world’s coldest regions and to inspire changes in behaviour that can slow it down. More....

Carbon Neutral Building Design – How Low Can You Go?

2007-07-14T19:48:00.000+01:00

Green Building Studio povides the tools and knowledge necessary to design carbon neutral buildings. "We will begin by assessing the carbon footprint of a schematic design and modifying the design to minimize its carbon footprint with parametric simulations" More...

Welcome to my new GREEN BIM blog!

2007-07-14T18:04:00.000+01:00

I plan to capture my path into green design in architecture; you can visit this site to see how I get on. ..these are early days for me - you could say I am a bit of a Green newbie.

There are some early indicators of direction in respect of tools I may use these include IES and Ecotect which seem popular....and rating systems like LEED and BREEAM being well established in the industry….there is much talk about reducing carbon footprint and less talk about negative carbon footprints…there is much talk about making our new building greener and less talk about re-using our existing building stock. Can you do “green design” for a company whose building is for a Cigarette manufacturer!

Designers are aware of the need for sustainable design but are often unsure what to do, often decisions are made to late when costs for change will be high and there is no appetite to delay the programme. The idea of doing early design is important....the orientation of a building for example may not give significant savings in construction costs but can give significant savings in energy use and life cycle costs.

Just a couple of thoughts to start my green bim blog. If you would like to visit my web site go to http://www.4bim.com/